Nederman Filtermax F30 - Fume and Dust Extractor / Extraction System ***MAKE AN OFFER***

BROADMEADOWS, VIC

FilterMax F30 is a complete filter solution for the entire workshop. With it’s integrated preseparator the FilterMax F30 is ideal for applications with fume and coarse particles. FilterMax F30 is an efficient and compact filter with capacity up to 10 000 m³/h (6000 cfm) The FilterMax F30 is designed for industrial handling of none explosive dry dust and fume. The compact and fficient integrated pre-separator captures up to 80% of coarse particles and heavy sparks which will extend the lifetime of the filter cartridge. The small inner volume in combination with the air distributing support cage gives efficient cleaning. Shallow open pleats allows efficient removal of dust.
The cartridges is available in different materials. The flat pocket shaped minimizes the area of the “lost” media on top of the cartridge.
With it’s sturdy design, smooth inner surfaces, optimized angles of repose and digital control system, the filter fulfills stringent demands for continuous operation and effective filtration.
The modular design makes it easy to to expand the capacity of an installed system and will also make transportation, handling and installation as easy as possible. To simplify use and guarantee optimum performance, FilterMax F30 is equipped with Nederman’s automatic cleaning system. The pulse-jet system shoots short, powerful jets of air into the filter cartridges. The dirt is released from the filter surface and falls down into a container. The pulse-jet system cleans the filter cartridges in sequence while the filter is in operation.

• Automatic control system
• Pulse-jet cleaning system
• Pulse-jet cleaning system
• Integrated pre-separator / spark trap

Noise level (dB(A)) F 30, 50 dBA
F 60, 63 dBA
F 90, 73 dBA
Acc to ISO 11203
Protection class IP 54
Filter efficiency (%) 99
Compressed air requirement 4–6 bar / 60 - 90 psi, water and oil free
Compressed air consumption
70 N-litres/min at 30 sec intervals,
35 N-litres/cleaning pulse
2.5 cfm/min at 30 sec intervals,
1.25 cfm/cleaning pulse

Installation [Indoor], [Outdoor]
Material 3 mm painted steel, epoxy based zinc primer and top coat(C4 acc. to EN ISO 12944)

Filter cleaning method [PulseJet]

Application [dust], [fumes]

Working pressure (kPa) 0 to - 5,0, not over pressure

Capacity (max airflow m3/h) F 30 - 3 500 m3/h

Operating Temperature -20°C to +60 C

Process air, 0°C to +60 C

Dimensions
Attachment Exhaust outlet part 1 680 mm(L) x 470mm (H) x 370mm (W) Diameter 280mm
Exhaust outlet part 2 620mm(L) x 220mm(H) x 420mm (W)
4qty x Legs 200mm (L) x 200mm(W) x 490mm (H)

twin collector box ~ 240L approx. capacity ea. with overall dimension 690mm (L) x 220mm(H) x 350mm(D)

Main extraction system dimensions
1850mm(L) x1520mm (H) x 1150mm (W)

Filter box Dimensions
1120mm (L) x 800mm (H) with each filter 10mm wide and 50mm open for air jet/pulse operation

The FilterMax F30 can also be cleaned after operation if so desired. The FilterMax F30 cartridge is a high performance, compact filter cartridge. The design is optimized for efficient media usage with good cleaning properties.